|At a glance|
|Product||Western Digital My Cloud Mirror Gen 2 (WDBWVZ0040JWT) [Website]|
|Summary||Two-bay Marvell Armada 38X powered home NAS with personal cloud & media serving|
|Pros||• Hassle-free remote access|
• DLNA and iTunes servers
• Add-in app support
• Bundled licenses for Smartware Pro backup software
|Cons||• Rsync backup not supported|
• No logging
• iSCSI not supported
• Can't schedule backup to external devices
Typical Price: $0 Buy From Amazon
Disk manufacturers who also make NASes have a price advantage over manufacturers of BYOD products. This is certainly the case for the recently updated My Cloud Mirror Gen 2. The My Cloud Mirror Gen 2 is very similar to the more business-oriented My Cloud EX2 we reviewed in March of 2014. The new Gen 2 has a different processor, a white case and the SOHO My Cloud feature set.
Our review unit was the $310 4 TB model. However, the Gen 2 also is available in a $370 6 TB version (2 X 3 TB) and a $410 8 TB version (2 X 4 TB). Each of the models arrives preconfigured for RAID 1 (mirrored), so your actual available fault-tolerant storage will be half the stated capacity.
Priced at $310 with two 2 TB drives included, the Gen 2 is cheaper than quite a few BYOD 2 bay NASes. I'll be using the Seagate NAS Pro 2-Bay and NETGEAR ReadyNAS RN202 for comparison throughout the review.
The Seagate NAS Pro 2 bay, like the Gen 2, includes two 2 TB drives in its $340 price. For a BYOD NAS, I chose the NETGEAR ReadyNAS RN202 because, priced at $250, it was the cheapest BYOD NAS that also had a better Total NAS score than the Gen 2. If you add the cost of two WD RED 2 TB drives at ~ $95 each, the total cost for the RN202 with an equivalent amount of storage rises to $440.
The callouts below were taken from the user manual. While WD has a support section with downloads for the Gen 2, the user manual isn't one of the available downloads. We found a link for the manual in the help section of the Gen 2's user interface.
The front panel is very simple - there's just a single power/status LED and a LED for each drive. A combination of red, blue or not lit coupled with various blinking patterns tells you what you need to know.
WD My Cloud Mirror Gen 2 front panel callouts and LED key
The image below shows the rear panel callouts and LED indicators. The single Gigabit Ethernet port has two status LEDs - one for link speed and one for activity. There is a pin reset, a Kensington security slot and two USB 3.0 ports. There's a small, very quiet fan positioned at the front bottom of the case that moves air across the drives and board. The Gen 2 was rated as very quiet and drew 14 W active and 6 W on standby with the two WD Red 2 TB drives spun down..
WD My Cloud Mirror Gen 2 rear panel callouts and LED key
The image below shows the main board with the heatsink in place.
WD My Cloud Mirror Gen 2 main PCB with heat sink
This image below shows the board with the heatsink removed to expose the processor.
WD My Cloud Mirror Gen 2 main PCB without heat sink
This is a completely new board, not the same as the WD My Cloud EX2's. Table 1 below shows the key components for the comparison two bay NASes.
|WD My Cloud Mirror Gen 2||Seagate NAS Pro||NETGEAR RN202|
|CPU||Marvell ARMADA 38X (88F6820-A0) Dual-Core ARM Cortex-A9 @ 1.33 GHz||Intel Atom C2338 (2C/2T Silvermont x86 Cores @ 1.74 GHz)||Annapurna Labs 1.4 GHz ARM Cortex A15 Dual Core SoC (AL21200-1400-A0-E-1AN-8-C)|
|RAM||512 MB Nanya NT5CC128M16FP-DI (x2)||2 GB DDR3 SoDIMM||2 GB DDR3 on board Samsung K4B4G0846D (x4)|
|Flash||256 MB Hynix H27U2G8F2CTR (x1)||256 MB||64 MB Macronix MX25L512EMI ? Spansion MS01G200HBHI00|
|Ethernet||Marvell 88E1512-NNP2 Gigabit Ethernet Transceiver||Intel I211-AT Gigabit Ethernet Controller (x2)||Atheros AR8035 (x2)|
|SATA||In Marvell ARMADA 38X processor||In CPU (for up to 6 drives)||Asmedia ASM1060 6 Gbps SATA controller|
|USB 3.0||In Marvell ARMADA 38X processor||USB 3.0: Asmedia ASM1042A PCIe dual USB 3.0 host controller||Etron Tech EJ188H 2 port USB 3.0 Host Controller|
Table 1: Key component summary and comparison
The My Cloud Mirror Gen 2 arrives preconfigured for RAID 1. There is no possibility for RAID Expansion. Changing to RAID 0 or JBOD completely deletes all data from the drives.