Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

Setup

Connecting up the DSM-520 was straightforward, but since it didn't come with an HDMI cable, I found out first-hand about how much these connections can cost. My local big-box retailer wanted upwards of $100 for a cable that would convert from the HDMI port on the DSM-520 to the Digital Visual Interface (DVI) port on my TV. A $100 cable to hook up a $250 device? Ouch.

Not willing to fork over $100 for a cable, I first opted to hook the box up with analog HD cables. But then eventually ended up ordering a DVI cable and a HDMI converter on-line for about half the big-box store price. Since these aren't like the 79-cent RCA cables you can pick up at Radio Shack, the cost of digital cables is something to consider when pricing your system. Along with the A/V cables, I plugged in a network cable, the power cord and turned the box on.

The first user screen to appear on my TV was a wizard (Figure 3), which directed me to make sure I had a media server running on my network. According to the documentation, the DSM-520 uses the Universal Plug and Play (UPnP) audio/video protocol to deliver content, so any UPnP-compliant media server should work.

Figure 3: The installation wizard

Figure 3: The installation wizard

I wanted to try out the D-Link supplied server, so I used the included (Windows-only) CD to install a media server on my Windows XP laptop (Figure 4).

Figure 4: Windows media server

Figure 4: Windows media server

The idea is that you tell the server where your music, movies and pictures are located on your hard-drive and then the server makes the content available to the DSM-520. After the server was installed on my Windows system, I turned my attention to the installation wizard still running on my DSM-520. The wizard walked me through various steps, such as giving the box a name and setting up the network (Figure 5).

Figure 5: Network setup

Figure 5: Network setup

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2