Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Basics

Data and Phone Patch Panels - more

While researching these alternatives, I found that punch-down "connection systems" are available (such as Siemon's S210) that are rated for up to CAT6 termination! This meant that I could use either flavor of patch panel for both data and phone drops.

In the end, however, I opted for using two 12-position CAT5e RJ45-style panels for both data and phone drops, with three things influencing my decision. The first was that I would have ended up having to make jumper cables to go from the punch-down block to RJ45 plugs for any of my data connections. (I could have purchased these cables, but the cost was prohibitive.)

The second reason was that punchdown blocks are more intended for terminating large multi-line trunk cables so that they can be cross-connected to individual phone jacks instead of connecting multiple phones to a single telco line. While techniques exist for connecting multiple drops to a single phone line, they're not really recommended.

In the end, the thing that tipped the scales toward using RJ45-style patch panels was my discovery of Leviton's 47609-EMP Telephone Patching Expansion Board (Figure 9). While it was a bit pricey at around $26 at SmartHomeUSA.com, it did the trick for me, with the ability to connect up to seven phone drops to up to four telco lines.

Leviton Telephone Patching Expansion Board

Figure 9: Leviton Telephone Patching Expansion Board

Although seven drops was not enough to support all of my planned phone jacks, it was fine to at least get me started. And I could always use just plain ol' phone jack-splitters in a pinch if I ran out of jacks on the board.

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

If someone is using this on their local machine on the network, is there anyway of forcing them to use my dns servers or blocking it?
I know there are lots of experts on this forum, so I was wondering if anyone could help me with a problem related to my internet connection. The probl...
Yesterday I installed the Kamoj v5 add-on with my Voxel firmware v1.0.2.75.2. I had some trouble with the addin and wanted to remove it by reinstallin...
I’m hoping for some insight so I can clarify in my own head. Please bear with me. Both are methods of securing my LAN, both mitigate a dynamic WAN IP ...
Would this work?nvram set FORCE_AUTO_UPGRADE=nnvram commitrebootCC

Don't Miss These

  • 1
  • 2
  • 3