Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Basics

Setting Up a Wireless Network

Now that you know the building blocks of a wireless network, how do you put them together into something that will let you get some work done while you're sitting in your favorite chair? Glad you asked! The approach you take depends on where you're starting from, so we'll take a look at the common situations.

Case 1

Case 1) Adding wireless to an existing Ethernet network - Internet sharing via Hardware Router.

If you already have your network set up, a lot of the hard work is behind you, so congratulations! If you have installed a hardware router to handle your Internet sharing chores, you'll just need to add an Access Point (AP) to your network to support your wireless clients.

Figure 1 - Network with Router and Access Point

Figure 1 - Network with Router and Access Point

Figure 1 shows how you'd set up a network if you're doing your Internet sharing with a hardware router. All you need to do is connect the Access Point of your choice to one of your router's LAN ports, configure the Access Point, and you should be in business.

Tip: Depending on how your Access Point's Ethernet port is configured, you may need to use a Crossover cable to connect the AP, or use a normal UTP cable and the router's Uplink port. Just let the lights on the router port and AP be your guide. When you've got things connected correctly, both lights should be lit.

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello, I'm seeking advise on making sure a new NAS I will be installing and my soon to be home security camera and home network are secure.I would lik...
Hello,After many hours spent researching the issue, I still have not been able to properly configure my router. CenturyLink provided a username and pa...
Hi,I was able to use my tunnelbear account to setup the openvpn client, it connects ok, bit non of the device's traffix is going through that tunnel.h...
All, i have an AC88UAbout a year and a half ago i got this router brand new. First thing out of the box i flashed merlin.It worked well for a short pe...
The past few updates I've noticed that my ISPs IPv6 DNS address is still getting passed to my devices even with get DNS automatically turned off under...

Don't Miss These

  • 1
  • 2
  • 3