Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

InterWorking Labs today announced Mini Maxwell, a portable, low-cost network emulator.

The product is a Layer 2 network emulator with the ability to apply packet impairments including drop/lose, duplicate, delay and reordering to five user-defined traffic "bands" in both transmit and receive directions. A variety of packet filters can be applied including IPv4 source/destination address, Layer 3 source/destination port, protocol, MAC address and more.

The Mini Maxwell measures 6" x 6" x 1" weighs less than two pounds and is controlled via a web interface. Two 10/100 Ethernet ports are available for traffic and one for control.

The product is available now for $1,499 direct from InternetWorking Labs' website.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all,I'm using a (new in Dec 2019) RT-AX88U with Merlin 384.18 firmware, and previously 384.17 etc. I've always been running Merlin on this box. Thi...
I was having problems with my RT-AC3100 after four years and decided to bite the bullet and purchase a new RT-AX88U. After unwrapping and plugging int...
Hi!I'm owner of RT-AC3100m using a asuswrt-merlin firmware (384.17) with Entware installed on WD 1TB USB3 HDD. On router I have installed ruTorrent 3....
I recently installed an RT-AC86U (following recommendations in another thread) and it has been working great. Except... a few times in the last couple...
Is the RT-ACRH17 still being supported with firmware updates? It's been over a year since the last update and I'm wondering if this is a dead product....

Don't Miss These

  • 1
  • 2
  • 3