Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

The NETGEAR FVS318G ProSafe 8-Port VPN Firewall has eight Gigabit switched LAN ports, one Gigabit WAN port and is spec'd to provide 25 Mbps LAN to WAN throughput and 6,000 concurrent sessions. Hardware specs include a 250 MHz processor, 8 MB of flash and 32 MB of RAM.

VPN features include support for five IPsec tunnels that can be encrypted with 56-bit (DES), 168-bit (3DES), or 256-bit (AES), Manual and IKE keying, FQDN support for dynamic IP addresses and client-to-site and site-to-site tunnels. NETGEAR specifies total 3DES VPN bandwidth at 7 Mbps.

Routing features include NAT and standard routing modes, software-configurable hardware DMZ port, SPI + NAT firewall, keyword filtering, port/service blocking and a SIP application layer gateway

The FVS318G is available now via with street pricing around $130.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi I have a RT-AC68U on 384.8_2 firmware. when i try to update to the latest version, the progress bar would go to 100 but the firmware stays the same...
I was helping my sister with her wifi. She only has a 15/1mbit connection, and everytime one of her kids uploaded a video to snapchat and such, the co...
I managed to setup a OpenVPN server on my Asus RT-AC1900P router. Then on the same router I added an OpenVPN client (I want everything in the local ne...
Currently, I've got two wireless routers connected as one large bridged network. The first router is provided by Comcast, the second router is an AC32...
I'm running Merlin 384.13 on an ASUS RT-AC86U. I installed Merlin yesterday for the first time and did a factory reset after installing. I've just don...

Don't Miss These

  • 1
  • 2
  • 3