Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Ubicom logoUbicom today announced its next-generation network processor that includes DDR3 RAM and USB 3.0 support.

The IP8100 family of network processors are targeted towards next-generation solutions for consumer, SOHO and SMB products.

Features include an upgraded memory subsystem with 1066 MHz DDR3/DDR2 interface and dual PCI Express Gen 2, USB 2.0, USB 3.0 and Gigabit Ethernet interfaces.

The IP8100 series also supports Ubicom's patented StreamEngine automatic QoS for upstream Internet traffic prioritization and WISH (Wireless Intelligent Stream Handling) for wireless traffic optimization.

The IP8100 is sampling now and offered with an OpenWRT SDK.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Small business. Main network is handled by ISP. We manage our wireless network. We have 3 AC66U. 1 is running in AP Mesh Router mode, 2 are in node mo...
hi i just bought the ax88u and replaced my ac88u.but i have a problem with the 5ghz wifi band. on my old ac88u i had around 300Mbit speed on my 5ghz b...
Hi,I'm trying to setup a home lab and I'm trying to get DNS to resolve a server on my network.Well, I can't use the dhcp feature because it won't let ...
So basically. When it came. Its still fine . I just connect it to the internet. Let it update the firmware. Then reset . Then I go set the router for ...
Recently got a M1 to try but signal not recognized by Asus, says "Your ISP's DHCP Has a Problem" (or something similar). So dug out old Cradlepoint MB...

Don't Miss These

  • 1
  • 2
  • 3