Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Linksys logoLinksys today unveiled the first available HomePlug AV2 adapter kit.

The Linksys PLEK500 Powerline HomePlug AV2 Kit uses HomePlug AV2 SISO technology. HomePlug AV2 SISO provides maximum link rates of up to only 500 Mbps vs. the Gigabit link rate that AV2 MIMO products will support. This is the same maximum link rate as older "HomePlug AV 500" products.

Linksys says that the AV2 adpaters have improved performance and coverage over "500 Mbps" powerline adapters due to the newer technology.

Linksys PLEK500 Powerline HomePlug AV2 Kit

Linksys PLEK500 Powerline HomePlug AV2 Kit

The kit includes two adapters that plug into any three-prong 120V outlet. Each adapter has a single Gigabit Ethernet port that can be connected to a switch to connect multiple devices.

The Linksys Powerline HomePlug AV2 Kit is available now, listing for $129.99.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Since last week I'm able to list the threads I follow, but if I open them it stays loading forever... How can I verify if it's on snb or tapatalk s...
The most convenient way is to use an USB-device as described in Voxel documentation.This is a Lazy Dog for those who want to do it without USB.The sho...
Hello,I live in a 3-story 3,000 sq ft house. I’ve been using Netgear R7000 (freshTomato firmware) located more or less centrally. Coverage has been gr...
HelloI have a ac68u router. It’s connected on the Wan port to a cable modem on bridge mode so router gets a public IP address from isp. Cable modem do...
I have a DrayTek 2926AC router that has an Ethernet feed as it's primary WAN and a 4G router (factory default settings + APN) as the Failover WAN.I al...

Don't Miss These

  • 1
  • 2
  • 3