Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

EnGenius logoEnGenius has announced a trio of Gigabit PoE smart switches.

The EGS5110P is a 1U rack-mountable 8-Port Gigabit PoE+ Smart Switch featuring eight IEEE 802.3at/af PoE ports and two SFP uplink ports. It has a total PoE budget of 130 W with up to 30 W per port.

The EGS2108P has eight Gigabit ports, four supporting IEEE 802.3af PoE at up to 15.4 W each for a total 61.6 W PoE budget. The EGS2110P has the same feature set as the EGS2108P plus two SFP uplink ports.

EnGenius PoE Smart switches

EnGenius PoE Smart switches

Smart switch features of all three include loopback detection, port mirroring, port trunking, bandwidth control, 802.1q QoS and 802.1p CoS support and port-based VLAN. 802.3ad link aggregation is not supported.

The EGS5110P is available now at a MSRP of $369.99. The EGS2108P and EGS2110P will be available in September at MSRPs of $199.99 and $249.99, respectively.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, I recently bought an Asus RT-AC1900P router with version 3.0.0.4.385_10000 in it and now I want to install Merlin Firmware.When clicking the "uplo...
Well how do I setup QOS when I am using browser extension SSL VPN on port 7070? Currently it shows untracked so QOS does nothing for my browser as it ...
Folks, mostly new to the forums here. I've been reading more and more and setting up my recently purchase RT-AX88U with the likes of Skynet/Diverson/A...
I get no errors it looked like it updated fine but when I logged back on it still says I need to update to 384.14_2. Any ideas?
My AC86U is currently running around 100%. The actually core use switches around but the total stays around 100-102%. I saw this happen once before an...

Don't Miss These

  • 1
  • 2
  • 3