Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Teleste logoFinnish company Teleste has announced a combination MoCA 2.0 / Wi-Fi adapter.

Teleste's Ethernet over Coax Wi-Fi adapter combines Entropic's EN2810 second-generation, single-chip MoCA 2.0 device with a four-port Gigabit Ethernet switch and 802.11ac access point.

A maximum of sixteen adapters can be connected to the same coax network at raw link rates up to 400 Mbps. The announcement also said a single pair of adapters could be connected at 1 Gbps using MoCA 2.0 "turbo" mode.

The new adapter appears to be an updated version of Teleste's echoBox Ethernet over coax adapter. The ecoBox uses MoCA 1.1, which provides a maximum link rate of 200 Mbps. The echoBox has an unspecified four-port "hub" and 2.4 GHz 802.11n access point.

Teleste echoBox

Teleste echoBox

The company said the Ethernet over Coax Wi-Fi adapter is "currently available". But no pricing was given and there is no product page found on Teleste's website. You'll probably have to troll eBay to find any of these when they do become available, because Teleste sells to service providers only.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I noticed the following in my log for my RT-AC86U (Latest FW 384_45717). Seems to be happening intermittently. I have a Trendnet TEG-S50g switch ho...
I've moved to a new apartment. Unfortunately I have to change some bits of my network setup and I want to improve the network (in regards of isolation...
Hi all,New here but hopefully, some of you folks can assist.I've got a 3 router set up (all AX88U) using AI Mesh. 1 is backhauled and 1 is currently w...
Does anyone have the defualt NTP and Network Monitoring settings to hand?I was bored yesterday and had a play with these settings only to realise when...
I know that for 99% of the people on this forum that this question is very simple but not for meI know that DHCP has something to do with allocating I...

Don't Miss These

  • 1
  • 2
  • 3