Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

D-Link logoD-Link's new dual-port 10GbE adapter is aimed at server applications.

The D-Link DXE-820T Dual Port 10GBASE-T RJ-45 PCI Express Adapter is a dual-port copper 10GbE adapter capable of supporting full duplex 10 Gbps throughput simultaneously on both ports.

The single-height adapter requires a PCI Express v2.0 x8/x16 slot and supports 10 GbE connection up to 100m with Cat C6A or higher UTP cable or 50m with Cat 6 cable. The card also supports 1 Gbps throughput at distances up to 100m with Cat 5 or higher UTP cable.

Features supported include NIC partitioning, up to 9K jumbo frames, 802.1Q VLAN tagging, 802.3x flow control, 802.3ad teaming, SNMP management and TCP/UDP checksum offloading. Maximum power consumption is around 23 W.

Drivers are available for Windows Server 2008 (x86, x64)/2008 R2 (x64), Windows Server 2012, RHEL 6.4/6.5 (x64), RHEL 5.9 (x64), SLES 11.2/11.3 (x64) and Solaris 11/11.1

D-Link DXE-820T

D-Link DXE-820T

The DXE-820T is shipping now and lists for $529.99.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I noticed the following in my log for my RT-AC86U (Latest FW 384_45717). Seems to be happening intermittently. I have a Trendnet TEG-S50g switch ho...
I've moved to a new apartment. Unfortunately I have to change some bits of my network setup and I want to improve the network (in regards of isolation...
Hi all,New here but hopefully, some of you folks can assist.I've got a 3 router set up (all AX88U) using AI Mesh. 1 is backhauled and 1 is currently w...
Does anyone have the defualt NTP and Network Monitoring settings to hand?I was bored yesterday and had a play with these settings only to realise when...
I know that for 99% of the people on this forum that this question is very simple but not for meI know that DHCP has something to do with allocating I...

Don't Miss These

  • 1
  • 2
  • 3