Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Installation and Setup - Packages

So what packages do I use? Well initrd, root, config, etc, local, modules, iptables, shorwall, and ulogd are basic packages that most everyone will need. The interface connected to my cable modem is configured by dhcp, so I also need dhcpcd (DHCP client daemon).

LBU comes with dhcpd (DHCP daemon) and dnscache (a dns caching daemon), but I found that dnscache has a problem resolving parts of my banking institution's online system. The same problem cropped up about a year ago with certain websites, notably weather.com [http://www.weather.com]. There was some discussion of this on the LEAF mailing list, and basically the problem boils down to the fact that dnscache is a very strict implimentation of DNS protocol, while some websites impliment DNS in a slightly non-standard way.

I found an alternative to dnscache that does seem to resolve even non-standard sites, by using the dnsmasq package, which also provides a DHCP server. The neat thing about dnsmasq is that it resolves local network names by using the /etc/hosts file and its own DHCP server, and it resolves the outside world by using servers listed in /etc/resolv.conf. Pretty slick. I believe that plans are for dnsmasq to replace dhcpd and dnscache in future versions of LBU.

The dropbear package (SSH server) is included with the base system, and is very handy for remote administration. The ezipupd package is an automatic updater for several dynamic name services, like dyndns.org [http://www.dyndns.org]. Finally, I run the ntpsimpl package (NTP server), which also requires the libm package.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I know there are lots of experts on this forum, so I was wondering if anyone could help me with a problem related to my internet connection. The probl...
Yesterday I installed the Kamoj v5 add-on with my Voxel firmware v1.0.2.75.2. I had some trouble with the addin and wanted to remove it by reinstallin...
If someone is using this on their local machine on the network, is there anyway of forcing them to use my dns servers or blocking it?
I’m hoping for some insight so I can clarify in my own head. Please bear with me. Both are methods of securing my LAN, both mitigate a dynamic WAN IP ...
Would this work?nvram set FORCE_AUTO_UPGRADE=nnvram commitrebootCC

Don't Miss These

  • 1
  • 2
  • 3