Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Performance - more

Subjectively, I found the menus of the FVS336G to be quite responsive. As I was evaluating the menus and options of the FVS336G, I periodically logged into an FVX538 and RVL200 for comparison purposes. Menu responsiveness on the FVS336G seemed quicker than the FVX538 and equal to the RVL200. 

Figure 15 shows stable routing throughput at nearly 60 Mbps both downstream and upstream. This means the router may not be able fully utilize its gigabit WAN port capability, but the lack of peaks and valleys in the graph indicates consistent performance and throughput.

Throughput

Figure 15: Routing throughput

I am also impressed with the FVS336G's solid 3DES throughput of 15-17 Mbps in Figure 16. In comparison, NETGEAR’s FVX538 3DES throughput maxed out under 13 Mbps, in spite of its additional 3DES Encryption Accelerator. The Linksys' RV042 does provide superior 3DES throughput at 22-32 Mbps, though.

IPSec throughput

Figure 16: IPSec throughput

Figure 17 displays SSL throughput at ~11Mbps in both directions. Considering that most remote users utilizing an SSL VPN connection will be over links with significantly less throughput, this is certainly adequate performance.

SSL througput

Figure 17: SSL throughput

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

v2.5.1 Updated 2020-05-10 Run an NTP server for your network. Graphs available for NTP accuracy on the Addons page of the WebUI.Inspired by kvic's p...
Hi there,This thread is about GNUton's Merlin builds for DSL devices.* A few words about how this project started:Some days back I bought a DSL-AC68U....
Hi all, I have been considering upgrading the home network primarily as it pertains to security. With the implementation of many IoT devices which wil...
I updated my ISP from 200 to 400 Mbps. So I tested the throughput, the ISP Modem is putting out 467 Mbps. I am testing using an ethernet cable directl...
Hello everyone, I recently bought an Asus RT-AX58U router for my mom's 2 story house. I'm very happy with the purchase but i'd like to extend the w...

Don't Miss These

  • 1
  • 2
  • 3