Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

SURFboard Wired Network Extender with RipCurrent
At a glance
ProductARRIS SURFboard Wired Network Extender with RipCurrent (SBX-1000P)   [Website]
SummaryG.hn powerline adapter based on Marvell G.hn chipset
Pros• Can coexist with HomePlug
• Web-based administration
• Doesn't block second outlet in a duplex
Cons• Can't interoperate with HomePlug
• Expensive compared to HomePlug AV2 MIMO

Introduction

Arris has tapped G.hn as its technology of choice for easy powerline-based network building for those whose homes are not graced with Ethernet drops in every room. Our review of the SBR-AC1900P router found weak 2.4 GHz and meh 5 GHz wireless performance, so perhaps it's good that easy network extension is built into the RipCurrent family.

This review looks at Arris' SBX-1000P SURFboard Wired Network Extender with RipCurrent, which is Arris' option for bringing Ethernet to any location with a standard AC wall outlet. We'll also be reviewing the SBX-AC1200P Wi-Fi Hotspot with RipCurrent separately.

Arris RipCurrent products

Arris RipCurrent products

The SBX-1000P adheres to the circular design format established by the SBR routers, measuring a little less than 4" in diameter and a bit under 2" thick, not counting its three-prong AC plug. The photo below shows that even with its circular design, it won't block the top outlet in a standard U.S. duplex outlet.

Arris SBX-1000P plugged in

Arris SBX-1000P plugged in

The callout diagram below shows the indicators and location of the switches and Gigabit Ethernet jack.

Arris SBX-1000P callouts

Arris SBX-1000P callouts

The LED decoder table taken from the User Manual shows how color and blinking are used for both the Link Quality and Pairing LEDs to indicate connection quality and network status.

Arris SBX-1000P LEDs

Arris SBX-1000P LEDs

The adapter ran warm to the touch and doesn't appear to have a power-save mode.

Inside

The SBX-1000P uses Marvell's G.hn solution, which has separate baseband and analog front end devices. Marvell's device uses MIMO via the power outlet ground pin, just as HomePlug AV2 MIMO adapters do.

Marvell G.hn adapter reference design block diagram

Marvell G.hn adapter reference design block diagram

The case was a bugger to get open, so there are no internal board photos. The component information was taken from the FCC ID photos for its sibling Wi-Fi extender, the SBX-AC1200P, which will be reviewed separately. The AC1200P shares RAM and Flash between its Wi-Fi and G.hn components, so the capacities in the table are based on what we found in Comtrend's PG-9172 G.hn Powerline Adapter.

Baseband Marvell 88LX3142 G.hn digital baseband processor
AFE Marvell 88LX2718 G.hn analog front-end
RAM 8 MB ?
Flash 8 MB ?
Ethernet ?
Table 1: Component summary

More LAN & WAN

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Symptom: TP-Link AV2000 (TL-PA9020) causes some sort of packet storm if two cables are connected from switch to first unit and nothing at all is conne...
I use a USB drive connected to my ASUS AC3200 Router for my SBACKUP destination on ubuntu linux. It has been working successfully, but stopped connect...
BitTorrent client uTorrent is suffering from an as yet undisclosed vulnerability. The security flaw in question was reported by Google vulnerability r...
Hello all.I have a RT-AC68U and are wondering: How long time shall I expect my router getting updates, like any updates, from ASUS, Merlin, Tomato, DD...
This is partially a duplicate message however I cannot find my original post. Sorry about that.Using Merlin 38o.69.2 on an Asus RT-CD87R I cannot save...

Don't Miss These

  • 1
  • 2
  • 3