Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Features

Introduction

Atom and Geode duke it out

I would have expected that Atom-powered NASes would be flooding the market by now, pushing aside the current crop of low-to-mid priced products based on Marvell's ORION Media Vault Processors.

But so far, the only way to get an Atom-based NAS has been to roll your own. Thecus, however, has selected AMD's Geode low-cost CPU to power its N4100PRO and upcoming N3200PRO. So I was able to get a feel for the Geode's performance when I recently reviewed the N4100PRO.

Since I also had performance data for my DIY Atom NAS, I wanted to include an Atom / Geode comparison in the N4100PRO review. But as I went to write up the comparison, I found that my Atom data wasn't really suited for a fair comparison.

So I went back to the bench, and ran new tests on both the Atom-based NAS and the Thecus N4100PRO. The goal was to get as good of an apples-to-apples comparison as I could get, considering that I couldn't exactly match operating systems.

The Contenders

To review, Table 1 shows the components used in the DIY Atom NAS. The configuration is the same as used in the Atom DIY articles, except for two changes: 512 MB vs. 2 GB of RAM; and Openfiler 2.3 instead of Ubuntu Server for the OS.

Component
CPU Intel Atom
Motherboard Intel BOXD945GCLF
RAM Kingston 512 GB DDR2 667 (PC2 5300)
Data Drives Hitachi Deskstar HDS721680PLA380
80GB 7200RPM 3.0 Gb/s SATA 8MB
Ethernet Intel PRO/1000 PCI
OS Openfiler 2.3
Table 1: Atom NAS component summary

I reduced the RAM to try to match the miserly 256 MB of RAM that Thecus included in the 4100PRO. But the smallest DIMM I had on hand was 512 MB, so that's what I used. As for the OS, I thought I would give Openfiler a shot, since I had yet to try it and it had been suggested over in the Forums.

Table 2 shows the same component information for the N4100PRO. As noted earlier, there is only 256 MB of RAM. Both products have PCI-based Ethernet, which will limit uncached top speed to just shy of 67 MB/s.

Component
CPU AMD Geode LX800
Motherboard Thecus custom
RAM DSL 256 GB DDR 400 SoDIMM
Data Drives WDC WD1600AAJS-0 Caviar Blue
160 GB, 7200 RPM 3.0 Gb/s, 8 MB
Ethernet Intel 82541 PCI gigabit Ethernet controller
OS Openfiler 2.3
Table 2: Thecus N4100PRO component summary

Previous experiments included trying Western Digital's VeliciRaptor drives, which I didn't find made much difference in performance. So I didn't move drives from NAS to NAS, since both sets of drives were 7200 RPM SATA with 8 MB caches. I did, however, use only two drives in the N4100PRO's RAID 0 array, to match the maximum capacity of the Atom NAS.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

After upgrading my desktop and NAS, it seems my router randomly crashes. For some reason it happens a lot when doing SSH and trying to display a big o...
Hello,I was wondering if there is any way to view the wireless log (displaying the signal strength and transmission and receive data rate) for devices...
are there any firewall rules i can use to block the flow of ipv6 to certain devices? note this is only to block it on certain devices.
I don’t know what to do. Should I integrate with ASUS 68u in bridge mode or use as stand-alone? Have FIOS gigabit and Windscribe VPN which we could pu...
I have been reading through the forums and on the internet and have not found an answer to my problem so I am posting here.I am trying to get my lapto...

Don't Miss These

  • 1
  • 2
  • 3