Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Features

New Charts are now available for USB and eSATA attached backup, with drives formatted in FAT, EXT3 and NTFS. Since not all products have eSATA ports or support all three formats, you may not find a particular product in a chart.

We also have added Charts for iSCSI Target Write and Read for those products that support this feature. The test is performed using the new NAS Testbed using the same Vista SP1 filecopy test used for the NAS File Copy Test.

Since we no longer test NASes with a 100 Mbps LAN connection, we have removed all 100 Mbps NAS Charts to streamline Chart selection. Only the 100 Mbps Average Write and Read Performance charts remain, to allow access to data for older products.

Please drop us a line or post a comment to share your thoughts about these changes or if you have a question.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I use RT-AC66U_B1 with firmware ac68u 384.10 and cable speed is 940 Mbps with 500 if I upgrade to a higher version does not exceed 200 with 200
Hi all,Thank you all for this community and Thank You Merlin and the other contributors for the firmware fork.This summer, my port-forwarding stopped ...
Hi guys,I recently migrated my network from a AC3200 and a few range extenders to a AX88U (main router running latest MerlinWRT) with 2 AI Mesch Route...
I just purchased the R7800 router and installed Voxel's latest firmware. I''m coming from Asus routers where I have used them for the past several yea...
I've been unable to post on the Merlin forum and am trying to learn the reason....testing... 1... 2... 3...

Don't Miss These

  • 1
  • 2
  • 3