Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The single-bay TS-119 and dual-bay TS-219 Turbo NASes use the new Marvell "Kirkwood" processor, have 512 MB of DDRII RAM and support up to 2 TB SATA drives. The TS-219 supports online RAID expansion and migration.

Both models support the full range of QNAP features including scheduled power on/off, UPnP/ DLNA media serving, download service and LAMP web-serving. Both products can support additional USB drives and USB print serving via three USB 2.0 ports. The TS-119 also has one eSATA port.

MSRPs for the TS-119 and TS-219 are $319 and $399 respectively. QNAP did not say when shipments would begin.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have been trying to minimize interference with other neighbouring 5Ghz networks but does anyone know why the choices are limited to 36-48 and 149-16...
I recently had to login to my router because we had lost power and normally after doing that I have to go in and disable port forwarding for my intern...
Hello.Currently at Traffic Analyzer -> Statistic -> Top 5 the pie chart shows only 5 devices, which is a little misleading (arguably useless) because ...
I have been trying to get plex installed and to no avail.is there a manual way with telnet to get it installedthe gui gets an unknown error at the bot...
Apologies if this has been asked, but is it possible to import Merlin settings (i.e. AC5300) to a non-Merlin device (i.e. AX11000)?I don't want to go ...

Don't Miss These

  • 1
  • 2
  • 3