Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The N8800SAS supports eight SATA or SAS (Serial Attached SCSI) hard drives in a 2U rackmount chassis driven by a Intel Core 2 Duo processor and 2GB of DDR2 memory.

Other hardware features include Dual DOM (Disk on Memory), 450W redundant power supply and dual Gigabit Ethernet ports with 802.3ad link aggregation, load balance, and failover.

Multiple RAID 0, 1, 5, 6,10 or JBOD volumes are supported with hot swap, hot spare, online RAID migration and expansion and can be Ext3, XFS or ZFS formatted. iSCSI target and initiator modes are supported for linking multiple units into a single logical storage array.

The N8800SAS supports Thecus' extensive feature set including remote replication, UPnP AV streaming, IP cameras, BitTorrent download, iTunes and Photo web servers.

The N8800SAS will be available later this month at an MSRP of $1999.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I'm currently on Voxel's 1.0.2.68SF firmware version.In the VPN Service settings, both TUN and TAP ports are on UDP 12973 and 12974 respectively.I hav...
Hi All,Just a quick one. I have successfully installed the Voxel firmware for my R9000 using expressVPN.Everything actually seems to be working VPN wi...
11ax is supposed to address the problem of density.Does 11ax router really help if you have a whole house full of 11n 2.4ghz IoT devices?Personal expe...
Greetings.My log file is getting bombarded with successful Dropbear messages, everytime Home Assistant is checking on things (ssh is only open to LAN....
My RT-AC68P has two USB ports, one each 2.0 and 3.0. I have two flash drives, one USB 3.0 and the other not 3.0. If I plug the 3.0 drive into the 2.0 ...

Don't Miss These

  • 1
  • 2
  • 3