Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus today announced a new, more powerful version of its seven-bay desktop NAS.

The N7700PRO is based on an Intel Core 2 Duo CPU with 4 GB of DDR2 800 memory and dual Gigabit Ethernet ports supporting load balancing, failover and 802.3.ad aggregation modes. Thecus says that an optional 10 GB Ethernet adapter can be added via a single PCI-e slot. Storage expansion and attached backup is supported via four USB 2.0 and one eSATA ports.

The N7700PRO has the same feature set as the original N7700, including multiple RAID 0, 1, 5,6,10,JBOD volumes with hot swap and spare and online RAID expansion and migration, iSCSI target an initiator, Ext3, XFS and ZFS filesystems and SMB/CIFS, HTTP/HTTPS, FTP, NFS v3 and AFP network file protocols.

The N7700PRO will be available in mid-November at an MSRP of $1019.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

So I'm quite new to the whole router business and my knowledge is very limited at the moment, so bare with me My current router is a piece of s**t my ...
Update 2020/10/08If you want to test the new feature, Instant Guard.Please check this thread https://www.snbforums.com/threads/asus-instant-guard-ios-...
I have a RT-AC56R and was wondering if the RT-AC56U firmware will work on it.
Hello All - This is my first post here, but have been learning from the sages on the site for some time. I’m sure there will be more questions to foll...
I have a large remodel, and will probably pull 1000-2000' of Ethernet cable, as there are some runs that might go 60-80'.What I've purchased already i...

Don't Miss These

  • 1
  • 2
  • 3