Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus 1U4600 Rackmount NAS ServerThecus has announced a next-generation four-bay rackmount combination NAS / DAS.

The 1U4600 Rackmount NAS Server runs on an Intel Celeron CPU with 1 GB of DDR RAM. Other hardware features include dual DOM (Disk On Memory), two Gigabit Ethernet LAN ports supporting auto-failover and aggregation, one eSATA port and five USB 2.0 host ports and a single USB 2.0 Target (B type) port. A 1U4600R version is also available, which includes a 250W redundant power supply.

Thecus 1U4600 Rackmount NAS Server

The four 3.5" SATA drives can be configured in RAID 0, 1, 5, 6, 10 and JBOD Ext3 / XFS / ZFS formatted volumes with online RAID level migration and RAID storage expansion supported. The 1U4600 can also be used as an iSCSI target and initiator or as attached storage via USB or eSATA connection.

The 1U4600 will be available in early March at an MSRP of $1,485.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I was doing some research and was seeing a lot about issues with the 2.4ghz band not working after a while or having very short range (or poor perform...
NB: I wholeheartedly agree with Merlin's reasoning for not supporting the AC3200 any more.I am thinking of giving my "spare" AC3200 to my dad as he ju...
So this makes it a problem for bandwidth limiting as for QoS you must bind mac and ip addresses. But the mac address is dynamic everytime you connect ...
I have an AiMesh setup with a AC88U as a base and 2 AC68U as Nodes which are cabled to the base. One AC68U is in a room with a fixed device ( a Ethern...
Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...

Don't Miss These

  • 1
  • 2
  • 3