Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus N8800+ Rackmount NAS ServerThecus today launched two high-bay-count desktop and rackmount NASes aimed at business buyers

The N7700+ NAS Server is a seven-bay desktop NAS powered by an Intel Celeron M CPU and 2 GB of high-speed DDR2 memory. Thecus says that it can achieve speeds of up to 300 MB/s using an optional PCI-e 10Gb Ethernet adapter.

Standard configuration is with dual Gigabit Ethernet ports supporting load balancing, failover and 802.3.ad aggregation modes. Storage expansion and attached backup is supported via four USB 2.0 ports and one eSATA port.

The N8800+ Rackmount NAS Server has eight 3.5" SATA drive bays supporting up to 16 TB of storage. It's also based on the same Intel Celeron M and 2 GB RAM platform as the N7700+, but can also accept an optional redundant power supply.

Both products support multiple RAID 0, 1, 5,6,10,JBOD volumes with hot swap and spare and online RAID expansion and migration. Features include iSCSI target thin provisioning and initiator, Ext3, XFS and ZFS filesystems, SMB/CIFS, HTTP/HTTPS, FTP, NFS v3 and AFP network file protocols and VMware Ready certification.

The N7700+ and N8800+ will be available later this month at MSRPs of $925 and $1705, respectively.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...
I have been tethering for years with no problem on an AC56U using a Samsung J7 on Android 7.x.x.I then swapped to an LG V30 with Android 8.0.0 and all...

Don't Miss These

  • 1
  • 2
  • 3