Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Buffalo LinkStation Pro VLIomega has announced three USB 3.0 SSD drives.

The pocket-sized 1.8-inch external USB 3.0 SSD Flash drives will be available early next month in 64 GB, 128 GB and 256GB capacities. Iomega says the drives perform twice as fast as USB 3.0 7200 RPM SATA hard drives.

Features include a metal case for 10 foot drop protection, 256-bit hardware encryption, bundled anti-virus and backup software, and three-year warranty (with product registration). The drives require no external power supply and can be connected to USB 2.0 ports at reduced speed.

Pricing is 64GB for $229.00, 128GB for $399.00, and 256GB for $749.00 (MSRP).

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have been trying to minimize interference with other neighbouring 5Ghz networks but does anyone know why the choices are limited to 36-48 and 149-16...
Hello.Currently at Traffic Analyzer -> Statistic -> Top 5 the pie chart shows only 5 devices, which is a little misleading (arguably useless) because ...
I recently had to login to my router because we had lost power and normally after doing that I have to go in and disable port forwarding for my intern...
I have been trying to get plex installed and to no avail.is there a manual way with telnet to get it installedthe gui gets an unknown error at the bot...
Apologies if this has been asked, but is it possible to import Merlin settings (i.e. AC5300) to a non-Merlin device (i.e. AX11000)?I don't want to go ...

Don't Miss These

  • 1
  • 2
  • 3