Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Synology DS211jSynology today announced two entry level and two mid level NASes.

The new additions to Synology's Personal and Home Office offerings are the DS211j and DS411j, powered by 1.2 GHz Marvell Kirkwood CPUs with 128 MB of RAM.

The mid-range adds are the DS111 and DS211, powered by 1.6 GHz Kirkwoods and 256 MB of memory.

All run Synology's DSM 3.0 OS, which supports a wide range of features including UPnP AV / DLNA media serving, network camera recording and remote photo viewing. All models work with Synology's ioS and Android apps.

MSRPs for the DS111 and DS211 are $219.99 and $319.99, respectively. Street pricing for the DS211j and DS411j are $229 and $389, respectively.

All models are available now.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have been trying to minimize interference with other neighbouring 5Ghz networks but does anyone know why the choices are limited to 36-48 and 149-16...
I recently had to login to my router because we had lost power and normally after doing that I have to go in and disable port forwarding for my intern...
Hello.Currently at Traffic Analyzer -> Statistic -> Top 5 the pie chart shows only 5 devices, which is a little misleading (arguably useless) because ...
I have been trying to get plex installed and to no avail.is there a manual way with telnet to get it installedthe gui gets an unknown error at the bot...
Apologies if this has been asked, but is it possible to import Merlin settings (i.e. AC5300) to a non-Merlin device (i.e. AX11000)?I don't want to go ...

Don't Miss These

  • 1
  • 2
  • 3