Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP TS-x19P+ NAS familyQNAP has launched a new home NAS line using Marvell's latest storage processor.

The TS-x19P+ line is targeted primarily at home and SOHO users. All models use the new Marvell 1.6 GHz 88F6282 Kirkwood storage processor also used in Buffalo's new V series [review].

The single bay TS-119P+, dual bay TS-219P+ and quad bay TS-419P+ all include 512 MB of DDRIII RAM and Gigabit LAN ports (dual ports on the TS-419P+). All models accept either 2.5" or 3.5" SATA hot-swappable drives of up to 2TB capacity, and support RAID 0/1 (TS-219P+) and RAID 0/1/5/6/5+hot spare (TS-419P+) with online RAID capacity expansion and online RAID level migration.

The new line runs QNAP's V3.3 OS with features including UPnP / DLNA and iTunes media servers, BT / FTP / HTTP and eMule downloader, IP camera recording and music, photo and video streaming to iOS and Android devices.

The TS-119P+, TS-219P+ and TS-419P+ will all start shipping this month at MSRPs of $279, $349 and $589, respectively.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi..Recently my son notified me he lost inter connection during the time of day where he is allowed to use it.When I checked the settings, they are no...
I downloaded the latest factory firmware for my x4s7800. I tried to install but I keep getting a msg. "The firmware is incorrect". I am using Voxel's ...
Hi all i,m new here, i hope this is the correct location to post this question.I have a netgear nighthawk r7000 running asuswrt merlin (384.11_2 ) and...
Hello, I wanted to ask can I set up mw6 nodes wired through a switch. At the moment, my primary node is connected through Ethernet cable to the second...
AsusWRT-Merlin on RT-AC86UNeed help to configure OpenVpn server with my own handshake keys and certificates generated with EasyRSA-v3.0.6 scripts on w...

Don't Miss These

  • 1
  • 2
  • 3