Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus N8900 Thecus has announced a new Intel i3 based rackmount NAS.

The N8900 is based on a dual-core Intel Core i3-2120 processor with 8 GB of DDR3 memory and Thecus' Dual DOM flash memory.

Eight hot-swappable bays support up to 3 TB SATA or SAS drives that can be configured into multiple Ext3, Ext4, and XFS formatted RAID 0, 1, 5, 6, 10, 50, 60 or JBOD volumes with optional AES-256 bit encryption.

Thecus N8900

Other hardware features include three Gigabit Ethernet ports supporting failover and link aggregation, two USB 3.0 ports, one eSATA port, analog audio output/input, and an HDMI port.

Further expansion is supported via three PCI-e slots (one 4-lane and two 8-lane), which can be used to add additional USB 3.0 or eSATA ports or a 10 Gb Ethernet adapter.

Thecus N8900 rear view

The N8900 runs Thecus' V5 OS with features including iSCSI target and initiator with thin provisioning and MPIO/MCS and clustering support.

The N8900 is shipping now at a $2999 MSRP.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Since last week I'm able to list the threads I follow, but if I open them it stays loading forever... How can I verify if it's on snb or tapatalk s...
The most convenient way is to use an USB-device as described in Voxel documentation.This is a Lazy Dog for those who want to do it without USB.The sho...
Hello,I live in a 3-story 3,000 sq ft house. I’ve been using Netgear R7000 (freshTomato firmware) located more or less centrally. Coverage has been gr...
HelloI have a ac68u router. It’s connected on the Wan port to a cable modem on bridge mode so router gets a public IP address from isp. Cable modem do...
I have a DrayTek 2926AC router that has an Ethernet feed as it's primary WAN and a 4G router (factory default settings + APN) as the Failover WAN.I al...

Don't Miss These

  • 1
  • 2
  • 3