Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP logo QNAP has announced two Intel Core i3 based NASes.

The two new models are the TS-879 Pro and TS-1079 Pro, with eight and ten bays in desktop form factors.

Both have hardware platforms based on Intel's Core i3-2120 CPU with 2 GB of DDR3 RAM and 512 MB flash DOM.

Other hardware features include dual Gigabit Ethernet ports supporting failover and aggregation, optional dual-port 10 Gb / 1 Gb network card, two USB 3.0, four USB 2.0 and two eSATA ports and LCD status display.

QNAP TS-879 Pro callouts

The new NASes can accept hot-swappable 2.5" and 3.5" SATA hard drives or SSDs, which can be configured into single Disk, JBOD, RAID 0, 1, 5, 5+Hot Spare, 6, 6+ Hot Spare, 10, 10+Hot Spare volumes. Unlike Thecus' recently-announced rackmount N8900, which is based on the same Intel CPU, the QNAP NASes do not accept SAS drives.

QNAP TS-879 and TS-1079 Pro

These new additions run QNAP's V3.5 OS, with support for Mac OS X Lion, RADIUS server, VMware, Citrix and Windows virtualization, RAID expansion and level migration and much more.

Pricing and availability were not announced, but the diskless TS-879 Pro is available at multiple etailers for $2199 and the diskless TS-1079 Pro for $2599.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

HI, I use a RT-AC68U with 342.12 firmware: lately I found some devices connected to wifi with the number 2 that seems to indicate that plus devices ar...
Do any TP-Link home wifi routers have support for an IPv6 firewall (meaning the ability to block unsolicited inbound IPv6 traffic, except for stuff th...
I'm trying to figure out the best way to bridge the following routers:TP-Link Archer C2600 - OpenWRT firmware - I want this to be the master/host for ...
Hello All,I am facing a weird issue with mobile devices (mainly android) connecting to internet.below is my network diagramView attachment 18663Issue ...
I am moving from a 1000 sq ft apartment to a 2000 sq ft single floor house and I suspect I will need to use an additional router for Wi-Fi coverage.Cu...

Don't Miss These

  • 1
  • 2
  • 3