Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus logoThecus has announced three Intel-based tower NASes.

The TopTower N6850, N8850 and N10850 are Thecus' new top-end tower format NASes with six, eight and ten hot-swap bays, respectively, supporting 3.5" SATA drives.

All three are based on Intel CPUs, the N6850 using a dual-core 2.6 GHz Pentium G630 with 2 GB of RAM, the N8850 a 3.3 GHz Core i3 2120 with 4 GB of RAM and the N10850 running a quad-core 3.1 GHz Xeon E3-1225 with 4 GB of RAM.

Thecus Top Tower NASes

Each of the new models comes with dual Gigabit Ethernet ports supporting aggregation and failover and two PCIe 8 lane slots that can accept an optional 10 GbE adapter. Other hardware features include four USB 2.0 and four USB 3.0 ports, HDMI output, mic input, line input and audio output.

Software features for all models include Data Burn to optional optical drives, McAfee bundled antivirus, cloud backup to DropBox and ElephantDrive, multi volume/multi filesystem support, iSCSI thin provisioning, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD volumes (no RAID 60 on the N6850) with RAID migration and expansion and AES 256 bit volume encryption.

The TopTower N6850, N8850 and N10850 start shipping in May at MSRPs of $1700, $2145 and $2480, respectively.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...
I have been tethering for years with no problem on an AC56U using a Samsung J7 on Android 7.x.x.I then swapped to an LG V30 with Android 8.0.0 and all...

Don't Miss These

  • 1
  • 2
  • 3