Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus logoThecus has announced two rackmount Intel Xeon based NASes.

The 3U N16000PRO and 2U N12000PRO are based on Intel's 3.4 GHz quad-core Xeon E3-1275 processor paired with 8GB of DDR3 RAM. Both models have three Intel based Gigabit Ethernet ports in the base configuration and can be upgraded with 10 GbE via PCI-e expansion slots.

The systems support 16 and 12 hot-swappable 3.5" SATA drives that can be configured in multiple RAID 0, 1, 5, 6, 10, 50, 60 or JBOD volumes. Volumes can be encrypted and formatted with your choice of EXT3, EXT4, and XFS filesystems.

Thecus N16000 and N12000

Thecus N16000 and N12000

Ports include six USB 2.0, two USB 3.0, 2 eSATA and one HDMI. There are also analog audio mic and line inputs and audio output.

Large storage arrays can be constructed by using built-in iSCSI initiator and target features where one master can be connected to eight iSCSI targets. Petabyte-capacity volumes can also be created using SAS ports to connect up to four D16000 expansion chassis.

Thecus N16000 and N12000 expansion alternatives

Thecus N16000 and N12000 expansion alternatives

The new rackmounts support all standard Thecus features including High Availability automatic synchronization and NAS-to-NAS failover, link aggregation, Data Guard network-based backup / sync, McAfee anti-virus and Cloud backup to DropBox, Amazon S3 and ElephantDrive.

Pricing and availability for the N12000PRO and N16000PRO were not announced.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Since last week I'm able to list the threads I follow, but if I open them it stays loading forever... How can I verify if it's on snb or tapatalk s...
The most convenient way is to use an USB-device as described in Voxel documentation.This is a Lazy Dog for those who want to do it without USB.The sho...
Hello,I live in a 3-story 3,000 sq ft house. I’ve been using Netgear R7000 (freshTomato firmware) located more or less centrally. Coverage has been gr...
HelloI have a ac68u router. It’s connected on the Wan port to a cable modem on bridge mode so router gets a public IP address from isp. Cable modem do...
I have a DrayTek 2926AC router that has an Ethernet feed as it's primary WAN and a 4G router (factory default settings + APN) as the Failover WAN.I al...

Don't Miss These

  • 1
  • 2
  • 3