Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Synology logoSynology has announced a new expandable Intel-based five-bay NAS.

The DS1513+ is similar to Synology's older DS1512+, with both based on 2.13 GHz Intel Atom D2700 CPUs. The DS1513+'s key advantages over the DS1512+ are four Gigabit Ethernet ports vs. two and 2 GB of DDR3 RAM (expandable to 4 GB) vs. 1 GB (expandable to 3 GB). Both have two USB 3.0, four USB 2.0 and two eSATA ports.

Using 4 TB drives, the base NAS supports up to 20 TB of raw capacity that can be expanded to a to 60 TB total with two DX513 expansion units that connect via eSATA.

Synology DS1513+

Synology DS1513+

The DS1513+ runs Synology's DSM 4.2 OS that includes improved cloud connectivity, virtualization support including VMware vSphere 5.1 with VAAI Support, Microsoft Hyper-V, and Citrix XenCenter.

The DS1513+ will be shipping soon at a suggested MSRP of $879.99. The DS1512+ will continue to be sold at around $800.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have been trying to minimize interference with other neighbouring 5Ghz networks but does anyone know why the choices are limited to 36-48 and 149-16...
Hello.Currently at Traffic Analyzer -> Statistic -> Top 5 the pie chart shows only 5 devices, which is a little misleading (arguably useless) because ...
I recently had to login to my router because we had lost power and normally after doing that I have to go in and disable port forwarding for my intern...
I have been trying to get plex installed and to no avail.is there a manual way with telnet to get it installedthe gui gets an unknown error at the bot...
Apologies if this has been asked, but is it possible to import Merlin settings (i.e. AC5300) to a non-Merlin device (i.e. AX11000)?I don't want to go ...

Don't Miss These

  • 1
  • 2
  • 3