Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Tags:

WD logoWD announced a less-expensive enterprise-class hard drive aimed at cloud datacenters.

The WD Se sits midway between WD's mainstay Re enterprise class 3.5" drive and its Red drive aimed at NAS applications. The new drive is built with essentially much of the same technology used in the Re drive, but tuned for cloud datacenter applications that use replication instead of RAID to build massive fault tolerant storage arrays.

WD Se drive

WD Se drive

The 3.5" 7200 RPM 6 Gb/s SATA drives have 64 MB of cache, come in 2, 3 and 4 TB capacities and have the same 171 MB/s OD data rate as Re drives. The key differences in the Se vs. Re drives are that the Se has an order of magnitude higher non-recoverable data rate (< 1 in 1014 vs. < 1 in 1015) and an 800K hour MTBF vs. 1.2 M hours for the Re.

WD says the higher vibration resistance of the Se vs. its Red drive make the Se better suited for rackmount NASes, desktop NASes with six or more bays or any NASes that run at heavy workloads.

Se hard drives are covered by a five year warranty and are shipping shortly in 2 TB (WD2000F9YZ), 3 TB (WD3000F9YZ) and 4 TB (WD4000F9YZ) capacities. MSRP's range from $159.99 to $309.99.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Searched, didn't find anything useful. Just installed Merlin 384.13. Enabled SSH in the GUI. Tried to login via SSG.The SSH server rejected your passw...
Been a lurker for a bit here and a Merlin user for about 6 months. Can I backup my settings on my old AC88U to restore on my new AX88U? Curious if any...
I have issues trying to route traffic from tcp port 51413. I have the feeling it's something simple that's staring me in the face, but can't for the l...
Any word from Asus about this?"Security researchers found a new vulnerability allowing potential attackers to hijack VPN connections on affected *NIX ...
Hi, I am having trouble setting up pppoe passthrough (relay) on my DSL-AC68U so that my new AX92U can establish an Internet connection.Setting the con...

Don't Miss These

  • 1
  • 2
  • 3