Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP logoQNAP has announced a new five bay NAS.

The 5-bay TS-563 Turbo NAS runs on an 2.0 GHz 64 bit AMD Embedded G-Series quad-core SoC processor with 2 or 8 GB of DDR3 RAM upgradable to 16 GB. Five hot-swappable SATA 6 Gbps bays support 2.5" and 3.5" hard or solid state drives

Dual Gigabit Ethernet ports can be optionally expanded to 4 x 1GbE ports or 2 x 1GbE + 2 x 10GbE ports using a built-in PCIe expansion slot and five USB 3.0 ports support drives, printers or UPS shutdown sync.

Other features include AES-NI hardware-accelerated encryption, SSD cache acceleration and AMD-V virtualization. QNAP says the TS-563 supports sequential read performance over 1,421 MB/s with AES-256 bit full NAS volume encryption. Four IP camera licenses for Surveillance Station are included.

QNAP TS-563

QNAP TS-563

Up to two QNAP expansion enclosures (8-bay UX-800P or 5-bay UX-500P) can be connected to expand the total storage capacity up to 21 drives (168 TB total raw capacity with 8 TB drives).

The 2 GB TS-563-2G and 8 GB TS-563-8G will be available in June for MSRP's of $559 and $709, respectively.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...
I have been tethering for years with no problem on an AC56U using a Samsung J7 on Android 7.x.x.I then swapped to an LG V30 with Android 8.0.0 and all...

Don't Miss These

  • 1
  • 2
  • 3