Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP logoQNAP new TS-x53A NASes sport Intel Braswell CPUs.

The TS-x53A family includes 2, 4, 6, and 8-drive bay models based on quad-core 1.66 GHz (burst 2.08GHz) Intel Braswell N3150 processors with 4 GB DDR3L RAM, expandable to a total of 8 GB.

All models include hot-swappable bays accepting 2.5" and 3.5" hard or solid-state drives, two 4K-capable HDMI outputs, four USB 3.0 ports, IR receiver for remote control and two audio input and one audio output jacks.

All have four aggregatable Gigabit Ethernet ports, except the two-bay TS-253A that has two. All can also be expanded via UX-500P or UX-800P expansion cabinets.

QNAP TS-x53A Series NASes

QNAP TS-x53A Series NASes

The new series include Intel's AES-NI hardware-accelerated encryption engine that QNAP says supports transfer speeds of up to 412 MB/s with AES 256-bit encryption for both full NAS volumes and shared folders. Other features include a new Linux Station, QNAP Snapshot file recovery, Qmedia channel for Roku players and TVs and QNAP's wide range of built-in and installable applications.

Models and MSRPs are:

  • TS-253A-4G/8G (2 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $499 / $649
  • TS-453A-4G/8G (4 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $599 / $749
  • TS-653A-4G/8G (6 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $799 / $949
  • TS-853A-4G/8G (8 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $999 / $1149

Everything is shipping now.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Since last week I'm able to list the threads I follow, but if I open them it stays loading forever... How can I verify if it's on snb or tapatalk s...
The most convenient way is to use an USB-device as described in Voxel documentation.This is a Lazy Dog for those who want to do it without USB.The sho...
Hello,I live in a 3-story 3,000 sq ft house. I’ve been using Netgear R7000 (freshTomato firmware) located more or less centrally. Coverage has been gr...
HelloI have a ac68u router. It’s connected on the Wan port to a cable modem on bridge mode so router gets a public IP address from isp. Cable modem do...
I have a DrayTek 2926AC router that has an Ethernet feed as it's primary WAN and a 4G router (factory default settings + APN) as the Failover WAN.I al...

Don't Miss These

  • 1
  • 2
  • 3