Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Setup & Admin - Shares, Groups, Users

Once the drive is formatted, you can start using the NSL right away since it sets up two default Shares, or folders (directories) on the NSL. Figure 4 shows the two shares as they appear in My Network Places. Disk 1 is the "Guest" share, which is by default Read/Write accessible by anyone on your network. Admin 1 is a share protected by the default "admin" user account and password.

Linksys NSLU2: Default shares

Figure 4: The NSLU2's default shares

If you poke around the NSL's directory structure using your OS's file explorer, you'll find that Disk 1 really is the "public" folder found in the Admin 1 folder. But you won't find the public share anywhere in the Shares admin interface (Figure 5). Actually, all Shares get created as folders / directories under the Admin 1 top-level share. Since "Disk 1" is the way that the Admin interface refers to the first physical disk, I think this is an unfortunate and confusing choice.

Linksys NSLU2: Share administration

Figure 5: Share administration

You can set up a new Share directly via its interface, or click on over to the User page (inconveniently located in a different Admin page grouping) and set one up automatically when setting up a new User (Figure 6). All Shares are created in the Admin 1 root directory, unless you use the Specify option and enter the path you desire - using a forward-slash format.

Linksys NSLU2: User administration

Figure 6: User administration

Users can also be assigned to Groups and have Disk Quotas assigned in 1MB increments. I verified that quotas are enforced per User, no matter on which Shares the User's files are stored.

Although the NSL's permission capabilities should be adequate for most of its target SOHO users, they may not be adequate for those who need finer-level control over who can access what. Basically, you can't set file or user-level permissions. Access to the "Private Folder" that can be created for each user is actually controlled by the creation of a same-named Group.

Permission mistakes for nested folders are a common mistake to make for server administration novices and can drive you crazy until you figure out what you're doing wrong. Unfortunately, the NSL lets you create nested folders (as described above), but doesn't properly handle access permissions. And worse, it doesn't properly represent the permissions in the Admin interface that it does set.

In my test case, I created a sub-folder that had different and more restrictive Group permissions than its parent folder. I found that the NSL properly wouldn't let me log into it with User info valid for the parent folder's permissions. But once I logged into the parent folder, I was granted complete access to the sub-folder.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey SNB members, I hope you are all well during this time. I have used Asus routers for a long time. My current and backup router have failed - so I d...
v2.5.1 Updated 2020-05-10 Run an NTP server for your network. Graphs available for NTP accuracy on the Addons page of the WebUI.Inspired by kvic's p...
Hi there,This thread is about GNUton's Merlin builds for DSL devices.* A few words about how this project started:Some days back I bought a DSL-AC68U....
Hi all, I have been considering upgrading the home network primarily as it pertains to security. With the implementation of many IoT devices which wil...
I updated my ISP from 200 to 400 Mbps. So I tested the throughput, the ISP Modem is putting out 467 Mbps. I am testing using an ethernet cable directl...

Don't Miss These

  • 1
  • 2
  • 3