Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Performance

I used IOzone to check out the NSL's file system performance and the full testing setup and methodology are described on this page. All checkout was done using a Maxtor One-Touch 160GB drive that Linksys arranged for the review. The 7200RPM drive has a USB 2.0 interface and 8MB cache.

NOTE!NOTES:
• The flat spots at the left front and right rear of the plots are zero value areas due to the IOzone test parameters that I set and not due to performance problems
• Keep in mind that the maximum raw data rate for 100Mbps Ethernet is 12500 kBytes/sec
• If you want a closer look at the test data or generate your own plots, download the test result file here (WKS format).

Figure 9 shows a 3D surface plot of the NSL's write performance using file sizes from 64 kBytes to 128MBytes and record sizes from 4 kBytes to 16MBytes. Note that the plot is oriented so that larger file sizes are closer to the front.

Linksys NSLU2: NAS Write performance

Figure 9: NSL NAS Write performance
(click on the image for a larger view)

I starting out running the test with file sizes up to 1 GByte in order to ensure that the test covered areas where there were no caching effects from my test computer's 512MB of memory. (Caching is what causes the "mountain" rising out of the plot's plateau.) But as you can see in Figure 9, write performance pretty much leveled off above a 64MByte file size. You can also see that peak performance (aided by caching) of almost 252MBytes/sec occurred with a 1MByte file size and record sizes 512 kBytes and under.

Read performance was an entirely different story. Figure 10 - which has a vertical scale one-tenth that of Figure 9 - shows comparatively little performance enhancement from caching. Peak performance of about 8.3MBytes/sec occurred with record and file size of only 64 kBytes.

Linksys NSLU2: NAS Read performance

Figure 10: NSL NAS Read performance
(click on the image for a larger view)

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

This thread is for the discussion topic : unbound_manager script. As per the GitHub Hints/Tips: Differences between the operational modes​ E...
Hi,I'm about to setup a Xioami button that upon click should enable disable a VPN Client on the router settings. I use an IPTV server that at times ge...
Continuation of. . .https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-78sf.64890/https://www.snbforums.com/threads/custom-firm...
Hi all, I'm hoping someone can help. My Google Wifi (GW) mesh performance has slowed ton a crawl lately. Even with all the pucks in the same room, I w...
I read in another thread that updating to a newer firmware fixed the issue, which seems to be that dnsomatic switched to https only updating. In the l...

Don't Miss These

  • 1
  • 2
  • 3