Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies and not to sue us. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Introduction

StorCenterPro

At a Glance
Product Iomega StorCenter Pro NAS 150d (33610)
Summary Simple, solid, RAID 5 NAS targeted at small business users
Pros • Hot-Swap RAID 5
• Gigabit Ethernet w/ jumbo frame
• NFS, AFP, AD support
Cons • No HTTPS
• Noisy
• No logging
• Firmware update requires Windows

It's been awhile since I checked out Iomega's StorCenter Pro 200D, a business-class Network Attached Storage (NAS) device. When I reviewed the product, I found it to be a powerful, full-featured NAS. But with a starting price of $1400 for an entry-level 320GB model, it was a bit pricey. Times, and prices, have changed. In this review, I'll check out the 1TB 150d, a more cost-effective model in the same StorCenter Pro line.

Like others in the StorCenter Pro line, the 150d is not a terribly small device. It's around 7x12x10 inches, comparable in size to a cinder block. Figure 1 shows the front of the box with the lockable door open.

Door Open

Figure 1: Door Open

You can see the four hot-swappable drives, two USB ports and a power button. Figure 2 shows the back of the box where two more USB ports are visible along with a gigabit-capable Ethernet port and two large fan vents.

Back Panel

Figure 2: Back Panel

Iomega advertises that the 150d is quiet, but I'm not sure what they're comparing it to. When the unit is powered up and those fans kick in, you know it. It's loud. Measuring the power-draw when the unit was booted showed that it pulled about 53 Watts. And if there's any question about what country you'll be using the 150d in, Iomega supplies six different types of power cords for their switchable power-supply.

Once the unit was fully up, I turned to the installation software supplied on a CD. Iomega supports installation from both Mac and Windows machines, so I ran the setup process on my preferred system, a MacBook Pro. After a couple of clicks, and a minute or so, I was presented with the pop-up shown in Figure 3 telling me that the unit was fully initialized.

Ready To Use

Figure 3: Ready To Use

When I clicked the "Mount Volume" button, the 150d was mounted as a network drive, ready to be used. If you have simple needs, your total setup time, start-to- finish would be less than five minutes.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

After upgrading to 384.5 my OpenVPN servers are irresponsive. Before, the connections worked fine, with access to both LAN and WAN.- I have fully reco...
When I am in the router UI, it goes back to login page every few minutes and I see this in the logs.. an ideas? It does not seem like the internet con...
Instead of andriod-349489853, I want to call the device (change the host-name) Ashleys-Phone.I see there are several places but I am unsure if they do...
Neil62 said:↑ My current AiMesh setup is as follows:Main Router RT-AC5300Nodes:1xAC53001xAC86U1xAC68UUpgraded Main router and 1xNode (RT-AC5300) via ...
Hello,I have an AC1900P (RT-AC68U) on Merlin firmware RT-AC68U_384.5_0I have three questions regarding the Client Listing.1. Wireless Guest Network cl...

Don't Miss These

  • 1
  • 2
  • 3