Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews


Another new feature I see in the TS-209 is the inclusion of a couple of multimedia servers. For serving content to UPnP A/V devices, QNAP has added a server from Twonkyvision. I've used this server previously with a number of different UPnP A/V devices, and it has performed well. Figure 9 shows the configuration screen for the Twonkyvision server.

UPnP A/V configuration

Figure 9: UPnP A/V configuration

The other new server included with the TS-209 is an iTunes compatible server. Figure 10 shows a portion of the iTunes application on my Mac after I've connected to the iTunes server on the TS-209 Pro.

iTunes Support

Figure 10: iTunes Support

As you can see, the album art for the selected song has been served up, and the DRM-restricted song played fine. From my poking around with the command line, I could see that the server being used was Firefly. Firefly normally runs a configuration service on port 3689, but when I connected to that port on the TS-209, instead of the standard configuration screen, my browser was served up a binary dump of the "indexnas.cgi" executable that is used internally for many TS-209 services. Oops, something is mis-configured here.

Raid Support

A big difference between the TS-101 (and TS-109 Pro) and the TS-209 is dual-drive support and the RAID capabilities that come with it. Figure 11 shows the RAID setup screen.

RAID Setup

Figure 11: RAID Setup

In this screen, you can see the various RAID modes that are supported, along with a nice description of what each mode means. In this case, I am set up for mirroring mode, where my total capacity is cut in half, but my data is duplicated for security in case of disk failure.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all,I would like to set up a script that can disable my Wireless Network based on some external triggers.I am currently using Voxel Firmware, which...
Hey SNB members, I hope you are all well during this time. I have used Asus routers for a long time. My current and backup router have failed - so I d...
v2.5.1 Updated 2020-05-10 Run an NTP server for your network. Graphs available for NTP accuracy on the Addons page of the WebUI.Inspired by kvic's p...
Hi there,This thread is about GNUton's Merlin builds for DSL devices.* A few words about how this project started:Some days back I bought a DSL-AC68U....
Hi all, I have been considering upgrading the home network primarily as it pertains to security. With the implementation of many IoT devices which wil...

Don't Miss These

  • 1
  • 2
  • 3