Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Introduction

Buffalo LinkStation EZ

At a Glance
Product Buffalo LinkStation EZ (LS-L500GL)
Summary Low cost networked storage drive designed to be a simple to install and use as a direct-attached drive
Pros • Good value (capacity for the price)
• Dead simple to set up and use
Cons • Disappointing performance
• No flexibility or expandability

Buffalo Technology is obviously familiar with the Network Attached Storage market, being one of the top producers, with a wide product line. One product they recently decided to add in order to expand their customer base is a low-cost, single-drive NAS that is as simple to use as an external direct-attached drive.

In other words, Buffalo set out to produce a product with the installation simplicity of a direct-attached hard drive, but the flexibility of a networked drive. While they achieved the goal of low cost and ease of use, they did make a serious tradeoff to get there.

The rear panel of the EZ (Figure 1) houses the power button (the small black button near the top), a recessed reset button, the fan grille, the 10/100/1000 Ethernet port, a slot for a locking cable and the socket for the power cable.

Rear view

Figure 1: Rear view of the LinkStation EZ

The EZ includes a setup guide, power "brick," setup CD, and an Ethernet cable. It also comes with fairly easy-to-use backup software that has useful features such as multiple file versions and data encryption.

Setup

Setup of the EZ is, as expected, exceedingly simple. It comes with a Quick Setup Guide, but even without this, all you need to do is put the CD in and follow the instructions. If you can't find the CD, you can download the NAS Navigator from Buffalo's website, but you'll be missing the Memeo backup software.

You can still access the EZ without any of these things, but you won't be able to change any of the settings. However, since there is no password by default, if you weren't planning to change any of the settings anyway, there's no reason to install the NAS Navigator software (Figure 2).

EZ setup

Figure 2: Installation of the Buffalo NAS Navigator software and setup of the EZ

The Setup Guide states that the EZ and NAS Navigator will work with a Mac, and although I have no doubt that it does, I didn't have access to a Mac with which to test it.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I found this as it does not really say enough other than running an old kernel in Linux is a problem. Probability they found a lot of old routers out ...
Just hit the FCC within the past few weekshttps://fccid.io/TE7C2300V2 is C2300 replacement.BCM4906 1.8ghz 64 bit A53 > MT7621AT 880mhz MIPS dual core ...
Hello,I'm exchanging my old all-in-one R7000 for a better setup and am wondering if my choice of components is OK or if I made some obvious mistake. I...
HelloI have a problem with mi UPnP Media Server on Asus RT-AC58U.I enabled my server and I can see the drive connected through USB port to my router b...
Anybody using HomeKit Secure Video? I want to buy a camera and try it as I have HomeKit running on my AppleTV 4K. My wife already has an iCloud storag...

Don't Miss These

  • 1
  • 2
  • 3