Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Turbo NAS
At a glance
ProductQNAP Turbo NAS (TS-269 Pro)   [Website]
SummaryBYOD two-bay Intel D2700 Atom RAID SATA NAS with many serving options.
Pros• Cloud backup to Amazon S3 & ElephantDrive
• Lots of features for the price
Cons• Expensive

Typical Price: $426  Buy From Amazon

Introduction

The last two-bay QNAP NAS we reviewed was the TS-212, based on Marvell's 1.2 GHz Kirkwood CPU. Today we're going to be taking a look at the TS-269 Pro which is based on an Intel dual-core 2.13 GHz Atom processor. The new CPU greatly boosts performance over the TS-212 we last tested. The TS-269 Pro joins the ranks of the Synology 1512+ and Thecus N4800 in D2700 Atom NAS offerings we've tested.

The rear panel holds a nice selection of ports and connectors and good things seem to come in pairs. Two USB 3.0 ports, two USB 2.0 ports and two Gigabit LAN ports. You get only a single eSATA connection, however. You may also notice the HDMI port up top that isn't labeled. According to QNAP specs, that is a VGA interface reserved for maintenance.

QNAP TS-269Pro rear panel

Inside

Under the hood of the TS-269 Pro you will find a 2.13 GHz Intel Atom Dual-Core D2700 CPU, 1GB of DDR3 RAM that is expandable to 3 GB via one open SoDIMM slot on the bottom side of the board. There is also 512 MB of flash, two Intel WG82574L Gigabit Ethernet Controllers and an Etron Tech EJ188G USB 3.0 Host Controller. The last item is a departure from the NEC USB 3.0 controller usually found.

A photo of the TS-269 Pro's board is shown below.

QNAP TS-269 Pro board

QNAP TS-269 Pro board

Power consumption measured 52 W with the two QNAP-supplied Seagate ST1000DM005 1TB drives spun up and 33 W with them down. The high standby numbers were due in large part to the beefy processor. Fan and drive noise could be classified as Medium-Low, with most of the noise coming from the drives.

Features

Firmware at test time was 3.7.3 Build 20120801. This version includes the MyCloudNAS feature and ElephantDrive cloud backup option. We covered MyCloudNAS in the TS-112 review. For a run-through of V3's other features, see the review or the online demo.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I was going to toss this into the eWaste pile but first I thought I would see if anyone wants it for their museum.This was a hand-me down I had given ...
I ran Nessus against my Asus Router Running Merlin version 384.18 (28-June-2020) Good news! No major Vulnerabilities. Just this one marked Low. It's a...
I have spent months/weeks on and off researching and hoping to find a resolution to the issues with stuttering or skipping in my games that I was unab...
i am not pro when it comes to wireless router settings so i need the help of experts here. can someone help me with the settings to get the best perfo...
Hi,So i have a netgear R7000 and its loaded with asuswrt-merlin. I am attempting to run Easytether on it also. I am a novice at playing around with th...

Don't Miss These

  • 1
  • 2
  • 3