Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   Print 

Ranker Performance Summary
Edimax WAP1750
3 x 3 AC Dual-Band Wall-Mount PoE Access Point
Test Notes:
Firmware tested: 1.1.7
Test client: NETGEAR R7000 in client bridge mode (1.0.3.60 firmware)
# 1 for Total Wireless (18.0)
# 1 for 2.4 GHz Avg. Throughput (1.0)
#1 for 2.4 GHz Downlink Throughput Avg. [72.8 Mbps]
#1 for 2.4 GHz Uplink Throughput Avg. [70.575 Mbps]
# 1 for 2.4 GHz Max. Throughput (1.0)
#1 for 2.4 GHz Max. Downlink Throughput [115.3 Mbps]
#1 for 2.4 GHz Max. Uplink Throughput [128.4 Mbps]
# 1 for 2.4 GHz Range (1.0)
#1 for 2.4 GHz Downlink Range [0 Mbps]
#1 for 2.4 GHz Uplink Range [0 Mbps]
# 1 for 5 GHz Avg. Throughput (1.0)
#1 for 5 GHz Avg. Downlink Throughput [171.025 Mbps]
#1 for 5 GHz Avg. Uplink Throughput [174.35 Mbps]
# 2 for 5 GHz Max. Throughput (1.5)
#1 for 5 GHz Max. Downlink Throughput [430 Mbps]
#2 for 5 GHz Uplink Throughput Max. [346.5 Mbps]
# 1 for 5 GHz Range (1.0)
#1 for 5 GHz Downlink Range [56 Mbps]
#1 for 5 GHz Uplink Range [90.7 Mbps]

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I was doing some research and was seeing a lot about issues with the 2.4ghz band not working after a while or having very short range (or poor perform...
NB: I wholeheartedly agree with Merlin's reasoning for not supporting the AC3200 any more.I am thinking of giving my "spare" AC3200 to my dad as he ju...
So this makes it a problem for bandwidth limiting as for QoS you must bind mac and ip addresses. But the mac address is dynamic everytime you connect ...
I have an AiMesh setup with a AC88U as a base and 2 AC68U as Nodes which are cabled to the base. One AC68U is in a room with a fixed device ( a Ethern...
Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...

Don't Miss These

  • 1
  • 2
  • 3