Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Panasonic's adapter is based on its proprietary "HD-PLC" technology that advertises a phyisical layer data rate of 190 Mbps. In an unusually detailed disclosure, the press release contains a footnote stating "Actual data rates are 80 Mbps for UDP (measured using SmartBitsR network performance analyzer) and 55 Mbps for TCP data transmission (achieved on Linux-based FTP server)".

Of course, no mention is made of HD-PLC's ability to play nicely with either powerline adapters based on DS2's 200 Mbps technology or HomePlug 1.0, 1.0 plus Turbo or HomePlug AV. But since there is no mention I think it's safe to assume that HD-PLD, like DS2, at minimum won't interoperate with the other technologies, and it probably won't be able to be plugged into the same home's wiring without causing serious problems.

The HomePlug alliance could have saved themselves and, more importantly, consumers a whole lot of hassle had they gotten HomePlug AV to market two years ago.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Okay, this is going to be quite long as I am a network noob; as such, I don’t know which items of information are important, and which may not be. Net...
I have a mixed environment today with an AC-68U as the primary internet boundary router connected to an AC-68U and an AC-66U via gigabit ethernet as A...
HelloI wanted to start fresh with 384.12, I had issues with 100% cores which was resolved with disabling Ai protectionHow can I make it so that it's l...
Hello all,I am looking to be able to do the following: At the touch of a button I would like to block clients on my LAN from accessing a set of extern...
I just noticed that my node was down (2x86U) .. most likely for multiple days. I have icmp disabled and only allow login with ssh via pub/private key....

Don't Miss These

  • 1
  • 2
  • 3