Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

In some cases, manufacturers are seeking additional certifications, such as Vista/WHQL and Intel Centrino, which is taking additional time. Since manufacturers prefer to minimize releases of new firmware and drivers due to the testing and support issues they bring, companies are waiting until all certifications are complete before posting the software for download. And even when new drivers and firmware are available, it will take a few months until updated and Draft 2.0 compliant products make it into the retail channels.

Since it is our policy to test products only with publicly-released drivers and firmware, this delay is why you haven't seen more reviews of draft 11n products on SmallNetBuilder. We have had products from Linksys and D-Link sitting in the lab ready to be tested for almost a month now, waiting for Draft 2.0 firmware and drivers to be released.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I was doing some research and was seeing a lot about issues with the 2.4ghz band not working after a while or having very short range (or poor perform...
NB: I wholeheartedly agree with Merlin's reasoning for not supporting the AC3200 any more.I am thinking of giving my "spare" AC3200 to my dad as he ju...
So this makes it a problem for bandwidth limiting as for QoS you must bind mac and ip addresses. But the mac address is dynamic everytime you connect ...
I have an AiMesh setup with a AC88U as a base and 2 AC68U as Nodes which are cabled to the base. One AC68U is in a room with a fixed device ( a Ethern...
Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...

Don't Miss These

  • 1
  • 2
  • 3