Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2011

CES LogoTRENDnet seems to be the only company that realizes that three-stream N routers need to connect to something besides notebook computers.

It today announced the TEW-687GA 450Mbps Wireless N Gaming Adapter. The adapter will connect at up to 450 Mbps link rates when paired with a three-stream N router in 40 MHz channel bonded mode. It has a Gigabit Ethernet port and supports Wi-Fi Protected Setup for easy secure connection. Since "dual-band" isn't in the product name, we'll assume that it's single band (2.4 GHz) only.

TRENDnet TEW-687GA 450Mbps Wireless N Gaming Adapter

The MSRP for the TEW-687GA is $149.99 and shipments start later this month.

To perhaps pair with the TEW-687GA, TRENDnet also introduced the first available concurrent dual-band 450 Mbps router. The TEW-692GR 450Mbps Concurrent Dual Band Wireless N Router connects both 2.4 and 5 GHz clients simultaneously, has one Gigabit WAN and four switched Gigabit LAN ports and supports WPS security.

TEW-692GR 450Mbps Concurrent Dual Band Wireless N Router

MSRP is $249.99 and it is supposed to start shipping in April.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I have an RT-AX88U connected wirelessly through aiMesh to two RT-AX92U access points. Strangely, one of these nodes often goes to sleep even whe...
Is there an NVRAM variable or some other trick to determine in a script if it is running on a node or on the main router? I tried searching the NVRAM...
So, i was fed up with my older router's poor range, so picked up an RT-AC86U from eBay - it is excellent, very pleased.However, I can't figure out to ...
I just purchased a rt-ax888u and im trying to get over 100mbit with the vpn...im using ipvanish...are there settings i need to use for the vpn to run ...
Wireless Router ModeFirmware 384.15Hello and thanks for allowing me to participate in SNB forums!I'm an IT admin with pretty good grasp of networking/...

Don't Miss These

  • 1
  • 2
  • 3