Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2015

CES logoAmped Wireless has announced two business class AC1750 wireless products

The APR175P Pro Series High Power AC1750 Access Point / Router can be configured as a router, access point or WDS Repeater / AP. It can also operate as a controller for up to seven other APR175P's set to "managed" mode.

The REB175P Pro Series High Power AC1750 Range Extender / Bridge uses the same hardware with a different firmware load to function as a "universal" range extender, "firewall" range extender, wireless bridge and WDS bridge.

Both are 3x3 AC1750 class designs supporting maximum link rates of 450 Mbps in 2.4 GHz and 1300 Mbps in 5 GHz.

Amped Wireless APR175P and REB175P

Amped Wireless APR175P and REB175P

The ProSeries' feature set supports up to 32 Wi-Fi networks, each of which has its own client isolation, bandwidth control, access control lists and schedules, VLANs, maximum users, MAC address filters and additional settings. Dual switched Gigabit Ethernet ports provide backbone connection and support VLANs and bandwidth control. One port supports Power over Ethernet to simplify installation.

As with Amped's other CES announcements, no pricing has been set for either product. Both will be available for order "early 2015".

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello. So I am new to qos settings. I have 3 Ring cameras that I want to make sure it gets highest priority for bandwidth. How do I set that up in the...
I picked up a RT-N53 to put it into a client bridge. I am only able to put it into repeater mode (as well as AP or main router).Does anyone know how t...
I have an ASUS RT-AC3200 router and when I am trying to use my xbox I am always on a strict NAT type and it is because it says I have a double NAT. I ...
i purchased a new asus rt-ac86u. connected to existing adsl modem (Linksys WAG320N) and i cam getting constant WAN connection fails, about every 5 to ...
Quick question - I have enabled FTP with TLS and it works just fine, however, how can I use my own certificate instead of the one generated by the rou...

Don't Miss These

  • 1
  • 2
  • 3