Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Updated - Linksys unvelied its Velop Whole Home Wi-Fi system early today to get out in front of the crush of CES 2017 news. The company describes Velop™ as an tri-band AC2200 MU-MIMO system using a "quad-core ARM Cortex-A7 processor". But Linksys needn't be so coy; Velop is most likely powered by the same Qualcomm technology used in all the other mesh systems to date.

Linksys Velop Whole Home Wi-Fi

Linksys Velop Whole Home Wi-Fi

The AC2200 classification (400 MHz @ 2.4 GHz + 2 x 867 Mbps @ 5 GHz) and "tri-band" description mean Velop has two dedicated 5 GHz backhaul radios; one operating in the low band channels (36-48) and one in the high (149-165). So performance should be more like eero, which also has dedicated 5 GHz backhaul. (eero does not have a dedicated 5 GHz backhaul radio.) But Velop stands out from the three-pack AC1200 crowd by also supporting MU-MIMO. Each node can be connected via Wi-Fi or Ethernet.

Other niceties include patent-pending "Spot Finder Technology" to guide optimum placement, airtime fairness, load balancing, band steering and "seamless roaming" to keep all your devices playing together nicely.

Linksys Velop Key Specs

Linksys Velop Key Specs

As you might expect, Velop also has two Gigabit Ethernet ports and a Bluetooth 4.0/LE radio for communicating with its companion app for setup from either iOS or Android devices. Not mentioned by Linksys, but outed in its FCC test reports is a Zigbee radio lurking within, waiting to be activated in a future firmware relase.

Velop is also launching with Amazon Alexa skills for guest network enabling / disabling and requesting network access credentials for both main and guest networks.

Velop is shipping now with list pricing of $199.99, $349.99 and $499.99 for one, two and three-pack SKUs covered by a 3 year warranty.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...
I have been tethering for years with no problem on an AC56U using a Samsung J7 on Android 7.x.x.I then swapped to an LG V30 with Android 8.0.0 and all...

Don't Miss These

  • 1
  • 2
  • 3