Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Devices

Meraki logoMeraki has announced two 802.11n cloud-managed access points.

The single-radio Meraki MR62 and dual-radio MR66 are designed for high client density, bandwidth-intensive applications and rugged conditions.

Features common to both include rugged IP67 rated cases, N-type antenna connectors, Gigabit Ethernet port with 802.3af PoE support and LED signal strength indicators.

The MR62 has a 2x2 802.11b/g/n radio with 26dBm peak transmit power, while the MR66 has one 2x2 802.11b/g/n radio and one 802.11a/n radio with 24 dBm peak transmit power.

Meraki MR66 and MR62 cloud managed APs

Both radios support beamforming, 20 and 40 MHz channel bandwidth, packet aggregation, 802.1g VLAN tagging, WEP, WPA / WPA2 Enterprise and Personal wireless security, wireless intrusion detection, guest isolation and Layer 7 traffic shaping.

The new APs work with Meraki's Cloud Controller which supports both point-to-multipoint mesh and point-to-point network topologies.

The MR62 and MR66 are available now at list prices of $699 and $1299 respectively.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Quick question - I have enabled FTP with TLS and it works just fine, however, how can I use my own certificate instead of the one generated by the rou...
I've just tried a bit of experimenting with the UPnP settings on my RT-AC86U but it hasn't been too successful.I tried letting my Synology DS218+ set ...
Hi allA few days ago, I decided I wanted to use my ac68u for using transmission. I installed Merlin and followed the guides for entware and then trans...
Hello,I'm looking to use one of the SFP+ only ports as a 1G uplink to my router. I'd rather not waste one of the 10G copper ports on the switch, henc...
View attachment 14488‚Äč Linksys Cloud Manager is a cloud-based Wi-Fi management solution that offloads the usual tasks, hardware and software manageme...

Don't Miss These

  • 1
  • 2
  • 3