Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other Reviews

Silex SX-1000U - Installation

The Setup guide is professional and easy to follow, but for all practical purposes there's not much to installation besides plugging it in and installing the device drivers. When you're ready to install the software, just pop the included Setup CD into your Windows PC and follow the on-screen instructions for installation (Figure 4).

Silex SX-1000U Install Screen
Figure 4: Silex SX-1000U Install Screen
(click image to enlarge)

Once you're done installing the Silex SX-1000U drivers and host utility, you are ready to begin sharing USB devices. Just open up the SX-Virtual Link software (Figure 5), find the USB Server, and select the devices you'd like to connect to. Once connected, you'll notice the device appear in your list of available hardware. You will also be prompted to install any necessary drivers for the device if you have not already done so.

Silex SX-1000U Utility
Figure 5: Silex SX-1000U Utility
(click image to enlarge)

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Greetings,I have a AiMesh Network comprised of three RT-AC68Us. I am running the current firmware on all three RT-AC68Us.Due to some stability issues,...
Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
View attachment 18716 ‚Äč CableLabs is pitching a Dual Channel Wi-Fi (DCW) specification that uses a hidden channel for downlink-only traffic and a sec...
This has been an issue ever since i got X4S be it stock firmware or Voxel's. You would think with the MAC address the setting would stick but it keeps...
I want to first of all thank my Loyal followings of #Nobody.Here is another @SomeWhereOverTheRainBow thread-cast#my-first-one-everList of things neede...

Don't Miss These

  • 1
  • 2
  • 3