Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other Reviews

Introduction

IOGear PCPortal GCN1000

At a Glance
Product IOGEAR PCPortal (GCN1000)
Summary Network Enabled IP KVM
Pros • BIOS level access over an IP network
• Virtual Media file sharing
• Web based client software
Cons • Mouse lag
• Incomplete Port forwarding documentation
• Not cascadeable

In this review, I'm going to take a look at the IOGEAR GCN1000 PCPortal—a device designed to leverage the power of networking to enable access to a workstation or server PC from anywhere in the world. The PCPortal is a network-enabled IP KVM device, which provides keyboard, mouse, and monitor connection to a remote network-connected computer.

Certainly, there are software solutions that allow for remote access to a workstation or server PC, such as GotoMyPC, pcAnywhere, or Windows Remote Desktop Connection, which is included with Windows XP Pro and Vista Business. For Linux, VNC and SSH are common means of remotely accessing a system over a network. The value added by the GCN1000 includes operating system, file and application-level access, as well as BIOS level access over a network connection from anywhere in the world.

There are other network enabled KVMs, also referred to as IP KVMs, such as the Lantronix Spider (reviewed). Both devices allow for full remote control of a computer, albeit with different target markets. The Lantronix is targeted more at the server market, while the IOGEAR seems positioned more toward desktop/workstation PCs, although both can be used for either.

I've used IOGEAR's PCPortal for the past few weeks while on a couple of business trips, and I have had the opportunity to test it from various remote locations. I installed the PCPortal in my home network and connected it to an XP Pro desktop PC, which I'll refer to as my "target" computer/PC throughout this review.

Installation

The GCN1000 PCPortal is a simple device, measuring nearly 7" wide by 3.25" deep and 1.2" high. Physically, its construction feels solid and looks to be well made, with the device weighing nearly 3 pounds. Overall, it is a pretty clean looking metal structure giving a sense of quality, with status LEDs as well as a network port on the front of the device shown in Figure 1.

Front view
Click to enlarge image

Figure 1: Front view of GCN1000 with diagram

Installing the device is a matter of plugging it in to power and your network, as well as to your target computer. There are three computer connection cables included with the GCN, in addition to an external power brick and network cable. All three cables connect to the back of the device, displayed in Figure 2.

Rear view
Click to enlarge image

Figure 2: Rear view of GCN1000 with diagram

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

My setup: ISP modem -> ac68 with last Merlin fw -> Xbox oneISP modem can't go bridged sadly.Ac68 IP is in the modem DMZ.The issue: after enabling upnp...
HiIm having an Asus RT-AC68U running on Merlin 384.7_2. Im having problems with the 5 Ghz band, its not broadcasting the SSID anymore. 2 GHz working.W...
I was searching for a solution of my problem now over one year...Problem:I have a repeater (tried several models, even Asus RP-AC66u, using now a TP-L...
I'm trying to use apache2 to reverse proxy a connection to my router config from the outside world, but I'm having some trouble getting it to work.If ...
Hey, total newb to networking and wanting to dip my toe in it with a little project. I would like to set up a network that would use NFC to authentica...

Don't Miss These

  • 1
  • 2
  • 3