Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Security News

The 25 IPsec VPN tunnels can be used for remote client or site-to-site tunnels and support manual key and Internet Key Exchange Security Association (IKE SA) assignment. Other features include 56-bit (DES) 168-bit (3DES), or 256-bit (AES) encryption, MD5 or SHA-1 hashing, PKI with X.509 v.3 certificate support and IPsec NAT traversal.

The 10 SSL tunnels support SSLv3 and TLS 1.0 versions with DES, 3DES, ARC4, AES (ECB, CBC, XCBC, CNTR) 128/256 bit encryption, MD5, SHA-1, MAC-MDS/SHA-1, HMAC-MD5/SHA-1 message integrity and RSA, Diffie-Hellman and self-generated certificates.

Lan to WAN throughput is spec'd at 60 Mbps, with 16 Mbps of IPsec and 10 Mbps of SSL tunnel throughput.

The FVS336G is backed by a lifetime warranty and is available now for $425 MSRP.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

How can i get IKEV2 IPsec server up and running?I can see only IKEV1 under IPsec advancedThanks
Greetings,I am running the official AsusWRT firmware (45717) on AC68U. In my previous setup I was using AiMesh, which was problematic. I have just mov...
I'm trying to set up a SanDisk Cruzer 64GB flash memory device to use as storage for my security cameras. It's attached to the rear USB port on my new...
Hi all i need some help.Dual-wan in fail over mode does not have wan0 and wan1, however if you disable and enable the secondary connection it goes fro...
AC5300latest FW 384.13friends i get too many below type of messages in my log for various Mac ids :Sep 17 20:08:11 WLCEVENTD: eth1: Disassoc Sep 17 20...

Don't Miss These

  • 1
  • 2
  • 3