Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Introduction

Astlinux is a bundled distribution of the Asterisk open source iPBX private branch exchange (PBX) software and a Linux operating system. Originally developed by Mark Spencer at Digium, Asterisk is the leading open source software in the telephony/VoIP space. Asterisk excels at combining traditional TDM telephony capability - provided through hardware from Digium and others - with VOIP services. These include call routing, media gateway, media server and SIP signaling capabilities.

Asterisk in a small, quiet package

Asterisk in a small, quiet package

The Asterisk user community has been growing tremendously over the past two years, especially since the v1.0 release in the fall of 2004. With that growth has come the development of new distributions that bundle suites of software tools, to ease the setup and administration of a new Asterisk system. Asterisk@Home and Xorcom Rapid are both fine examples of this sort of activity.

Astlinux was developed by Kristian Kielhofner, and intended to go in a fundamentally different direction. Astlinux provides an Asterisk installation on a Linux distribution that has been built from scratch and optimized for small format hardware platforms - it takes what is essentially an embedded systems approach to Linux and Asterisk. In this article, I'll show you how to build an VoIP PBX using Astlinux and a Soekris Net4801 single board computer (SBC).

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Continuation of. . .https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-78sf.64890/https://www.snbforums.com/threads/custom-firm...
Hi all, I'm hoping someone can help. My Google Wifi (GW) mesh performance has slowed ton a crawl lately. Even with all the pucks in the same room, I w...
I read in another thread that updating to a newer firmware fixed the issue, which seems to be that dnsomatic switched to https only updating. In the l...
v2.5.1 Updated 2020-05-10 Run an NTP server for your network. Graphs available for NTP accuracy on the Addons page of the WebUI.Inspired by kvic's p...
This thread is for the discussion topic : unbound_manager script. As per the GitHub Hints/Tips: Differences between the operational modes​ E...

Don't Miss These

  • 1
  • 2
  • 3