Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Insteon logo Insteon devices can now be controlled by Logitech Harmony remotes.

Using Harmony hub-based remotes, you can now control Insteon wall switches, outlets, plug-in dimmers, lightbulbs and other devices. All that is required is a Harmony Hub based remote, Insteon Hub (model 2245-222) and Insteon devices.

The integration does not work with IR-based remotes and does not work with older Insteon hubs or the newest HomeKit enabled Hub Pro (model 2243-222).

Insteon & Logitech Harmony

Insteon & Logitech Harmony

A Harmony remote can now be used to conrol "scenes" that include turning on devices and dimming lights. Harmony's IFTTT action channel can also be used to trigger Insteon devices.

Visit Insteon's Harmony page for more information.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

...

Over In The Forums

Some of them are obvious, i.e. roamast removes a client from an AP. However, many of us are facing issues with our routers, understanding what all the...
Hello,I just got an ASUS RT-AC68U B router, and I'm trying to create a few guest networks (with different subnets on them) to separate my home network...
Hi -I have a printer connected with a static IP via ethernet to the primary network, and also have a guest network setup for the kids. However, it wou...
Hi all,Using Voxel's firmware on the R9000, since V1.0.4.47 and the last before (I think, could be a bit longer) updates, I've run into an issue with ...
RT-AX92u: Firmware: 3.0.0.4.384_9177We have an issue with Iphones constantly bouncing, despite being sat next to one node with full signal. This could...

Don't Miss These

  • 1
  • 2
  • 3